Description

PIE 422 Practical Instrument Electronics Thermocouple Calibrator

PIE 422 Datasheet (PDF)

PIE 422 Manual (PDF)

 

PIE 422 Advantages:

-Automatic Stepping & Ramping

-Larger Display with Backlight
-Easy viewing in dark locations

-More Resistant to Accidental Damage
-Rubber Boot and Stronger Switches

-Separate Battery Compartment
-No more removing housing with screwdriver to replace batteries Calibration seals remain intact

-More Accurate and Repeatable
-NIST Traceable Cold Junction Sensor in isothermal block

-Easily Change Thermocouple Types
-Reconfigure without resetting calibrator

-Verify Cold Junction Temperature & Output
-Secondary display of compensated millivolt setting and cold junction temperature

-Includes Certificate of Calibration
-All PIE Calibrators come with a free signed and dated certificate.

---

Features:

Source and Read Fourteen T/C Types plus mV:
J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel), -13.000 to 80.000 mV

 

Calibrate with Confidence:
Resolution to 0.1 °F & °C; Accurate to 0.2°
Cold Junction Sensor Accurate to 0.05°C

 

Verify Heat Treating Uniformity Survey Recorders and perform System Accuracy Tests:
The PIE 422 is capable of meeting the requirements of an AMS 2750 Field Test Instrument when certified by an accredited laboratory.

 

Faster Calibrations:
Instantly select three outputs with EZ-CHECK switch
Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping

 

Easily Change T/C Types & Scale:
Double click to select T/C type & °F & °C

 

Easy-to-Read Display:
Turn on the backlight to read in dark areas of the plant

 

Use in the Plant, Field or Shop:
Includes Rubber Boot and mV Test Leads
Low profile switches resist accidental damage
Brass screws for T/C wires plus mini T/C socket

 

Simple “No Tool” Battery Changes:
Four inexpensive “AA” batteries

 

Verify Cold Junction Temperature & Output:
Secondary displays of compensated millivolt setting and cold junction temperature

---

Optional Accessories:
Thermocouple Wire Kit 1 – Types J, T E & K

• Part # 020-0202
  For any PIE Calibrator with thermocouple input. Wires with Miniature thermocouple plug on one end and bare leads on the other end.

Thermocouple Wire Kit 2 – Types B, R/S & N

• Part # 020-0203
  For any PIE Calibrator with thermocouple input. Wires with Miniature thermocouple plug on one end and bare leads on the other end.

---

PIE 422 Additional Information:

Weight	2 lbs
Dimensions	7.75 × 5.25 × 4.5 in