High Tech Systems & Equipment Inc. - Systems & Equipment 
Description
SSP1A150M7T Solid State Relay SSR
Harmony by Schneider Electric
| range of product | Harmony Solid State Relays |
|---|---|
| product or component type | Solid state relay up to 50 A |
| Provided accessory | Thermal pad |
| device short name | SSP1 |
| Number of phases | 1 phase |
| [In] rated current | 50 A |
| solid state output type | Zero voltage switching SCR output |
| output switching mode | Zero voltage switching |
| [Uc] control circuit voltage | 90…280 V AC |
|---|---|
| minimum switching voltage | 90 V AC turn-on |
| maximum switching voltage | 10 V AC turn-off |
| response time | 30 ms (turn-off) 25 ms (turn-on) |
| Input current | 5…10 mA |
| output voltage | 24…300 V AC |
| load current | 0.15…50 A |
| Transient overvoltage | 600 V |
| surge current | 625 A for 16.6 ms |
| maximum I²t for fusing | 1621 A².s for 8.33 ms at 60 Hz 1770 A².s for 10 ms at 50 Hz |
| Co-ordination type | Type 1 – 40 A miniature circuit breaker (MCB) – curve B Type 2 – 32 A miniature circuit breaker (MCB) – curve B |
| maximum leakage current | 1 mA off-state |
| maximum voltage drop | <1.15 V on-state |
| dV/dt | 500 V/µs off-state at maximum voltage |
| Power factor | 0.5 (with maximum load) |
| Motor controller rating | 0.75 hp 120 V AC 2 hp 240 V AC |
| insulation resistance | 1000 MOhm at 500 V DC |
| Maximum capacitance | 8 pF for input/output |
| dielectric strength | 4 kV AC for input/output 4 kV AC for input or output to case |
| [Uimp] rated impulse withstand voltage | 6 kV output to case 6 kV input to output |
| tightening torque | 1.5…1.7 N.m for input 2…2.2 N.m for output |
| connections – terminals | Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) with cable end for input Screw terminals: 0.5…5.26 mm², (AWG 20…AWG 10) with cable end for output Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) without cable end for input Screw terminals: 0.5…8.26 mm², (AWG 20…AWG 8) without cable end for output Forked type tag connectors: 9.2 x 4 mm for input Ring lugs: 9.2 x 4 mm for input Forked type tag connectors: 11.7 x 4.5 mm for output Ring lugs: 11.7 x 4.5 mm for output |
| Thermal resistance | 0.45 °C/W junction to case |
| thermal pad impedance | 0.48 °C-in²/W at 25 psi |
| LED indicator | LED, green for input |
| IP degree of protection | IP20 |
| safety reliability data | MTTFd = 1875.9 years B10d = 1731395 |
| net weight | 89.2 g |
| device presentation | Complete product |
| ambient air temperature for operation | -40…80 °C |
|---|---|
| ambient air temperature for storage | -40…125 °C |
| pollution degree | 2 |
| overvoltage category | III |
| product certifications | UL CSA CE EAC |
| marking | CE UL CSA EAC |
| standards | UL 508 CSA C22.2 No 14-13 EN/IEC 60950-1 EN/IEC 62314 |
Dimensions
(1)
Front view
(2)
Side view
(3)
Bottom view
