Description

SSP1A175BDT Solid State Relay SVDA SSR

Harmony by Schneider Electric

**Main**
range of product	Harmony Solid State Relays
product or component type	Solid state relay up to 75 A
Provided accessory	Thermal pad
device short name	SSP1
mounting support	Panel
Number of phases	1 phase
[In] rated current	75 A
solid state output type	SCR output Zero voltage switching
output switching mode	Zero voltage switching

**Complementary**
[Uc] control circuit voltage	3…32 V DC
minimum switching voltage	3 V DC turn-on
maximum switching voltage	1 V DC turn-off
response time	0.5 cycle (turn-on) 0.5 cycle (turn-off)
Input current	10 mA at 12 V DC
output voltage	24…300 V AC
load current	0.15…75 A
Transient overvoltage	600 V
surge current	1000 A for 16.6 ms
maximum I²t for fusing	4150 A².s for 8.33 ms at 60 Hz 4555 A².s for 10 ms at 50 Hz
Co-ordination type	Type 1 – 50 A miniature circuit breaker (MCB) – curve B Type 2 – 40 A miniature circuit breaker (MCB) – curve B
maximum leakage current	1 mA off-state
maximum voltage drop	<1.15 V on-state
dV/dt	500 V/µs off-state at maximum voltage
Power factor	0.5 (with maximum load)
Motor controller rating	1.5 hp 120 V AC 3 hp 240 V AC
insulation resistance	1000 MOhm at 500 V DC
Maximum capacitance	10 pF for input/output
dielectric strength	4 kV AC for input/output 4 kV AC for input or output to case
[Uimp] rated impulse withstand voltage	6 kV output to case 6 kV input to output
tightening torque	1.5…1.7 N.m for input 2…2.2 N.m for output
connections – terminals	Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) with cable end for input Screw terminals: 0.5…5.26 mm², (AWG 20…AWG 10) with cable end for output Screw terminals: 0.2…3.3 mm², (AWG 24…AWG 12) without cable end for input Screw terminals: 0.5…8.26 mm², (AWG 20…AWG 8) without cable end for output Forked type tag connectors: 9.2 x 4 mm for input Ring lugs: 9.2 x 4 mm for input Forked type tag connectors: 11.7 x 4.5 mm for output Ring lugs: 11.7 x 4.5 mm for output
Thermal resistance	0.3 °C/W junction to case
thermal pad impedance	0.48 °C-in²/W at 25 psi
LED indicator	LED, green for input
IP degree of protection	IP20
safety reliability data	MTTFd = 1875.9 years B10d = 1731395
net weight	89.2 g
device presentation	Complete product

**Environment**
ambient air temperature for operation	-40…80 °C
ambient air temperature for storage	-40…125 °C
pollution degree	2
overvoltage category	III
product certifications	CSA EAC CE UL
marking	CE CSA UL EAC
standards	CSA C22.2 No 14-13 EN/IEC 62314 EN/IEC 60950-1 UL 508